4.2.2.2 H
ANDLING THE LOAD
Only pallets in perfect conditions and not exceeding the indicated dimensions can
be loaded; the load must be compact and homogeneous and its weight and the
distance of its centre of gravity from the forks must be as indicated.
Approach the load to be handled and brake smoothly in such a way as to stop the
carriage near the load. Swing the forks forwards so that the mast is in vertical posi‐
tion.
The forks must be swung forwards very slowly, to prevent the carriage from
overturning and the load from sliding off the forks.
Move slowly forwards, taking care to avoid damaging the load and stop as soon as
the end of the fork comes into contact with the load.
Check that the centre of gravity of the load is in the middle of the two fork tines.
Lift the load.
At this point swing the forks backwards, so that the load is as near the operator as
possible.
Make sure that the way is free and proceed with the transport operation. Now
drive carefully, accelerating and decelaring slowly and reducing speed in bends.
Note:
When travelling on slopes, the load must lead (be on the uphill side); it is
absolutely forbidden to travel horizontally and to turn while the machine is
moving uphill or downhill.
Avoid parking or stopping the machine on slopes.
When transporting particularly bulky loads, whose height exceeds the height of
the control levers, pay the utmost attention to the position of your hands on the
controls.
Any abrupt movement of the load may cause your upper limbs to be crushed
between the distributor support and the load itself.
O
O
P
P
E
E
R
R
A
A
T
T
I
I
O
O
N
N
A
A
N
N
D
D
M
M
A
A
I
I
N
N
T
T
E
E
N
N
A
A
N
N
C
C
E
E
M
M
A
A
N
N
U
U
A
A
L
L
TP2000
24
MUTP2000171893021216
ATTENZIONE
ATTENZIONE
WARNING
WARNING
