![background image](http://html.mh-extra.com/html/pro-point/9027525/9027525_manual_1607384012.webp)
9027525
Magnetic Drilling and Tapping Press
V1.0
12
For technical questions call 1-800-665-8685
This tool is fitted with a 2-speed
gearbox (RDC4014). The gear is
used to reduce the output speed
when using large cutters (Fig. 3).
SLIDE SELECTOR
POSITION
SPEED CONTROLLER SETTING
Level 1
Level 6
/\
200/min
500/min
\/
100/min
265/min
The quick-release capstan assists in
simple dual-side operation.
To remove the capstan, accomplish
the following (Fig. 4):
1. Press in the central button of
the capstan hub (RDC4142),
holding onto the capstan arms (RDD4104).
2. With the button depressed, pull the capstan away from the main
body, holding on to the capstan arms.
3. Re-insert the hexagonal shaft into the hexagonal slot to attach the
capstan.
To fit the pipe adapter kit, accomplish the
following:
1. Assess whether the pipe to be cut has a
diameter between 2-1/4 in. and 4 in.
(Fig. 5) or over 4 in. (Fig. 6).
3. Attach the 4 adjustable angle plates
(RD3328) with cap screws (RD4325)
and washers (RD4205) to the magnet
side. Do not tighten.
Fig. 3
Fig. 4
Fig. 5