![background image](http://html.mh-extra.com/html/pro-point/9027525/9027525_manual_1607384007.webp)
V1.0
Magnetic Drilling and Tapping Press
9027525
Visit www.princessauto.com for more information
7
Read before using the machine.
When using electrical tools, basic safety precautions should always be
followed to reduce the risk of electric shock, fire and personal injury.
Ensure the magnet is off before plugging in the machine.
Do not use in wet or damp conditions. Failure to do so may result in
personal injury.
Do not use in the presence of flammable liquids, gases or in high risk
environments. Failure to do so may result in personal injury.
Before activating the machine, inspect all electrical supply cables
(including extension leads) and replace if damaged. Do not use if there
are any signs of damage.
Only use extension cables approved for site conditions.
Before activating the machine, always check the correct function of all
operational systems, switches, magnet etc.
Before operating, the machine must be securely retrained to a fixed
independent feature using the safety strap RDC4083 and stationary
rings RDC4082. Affix the stationary rings into the magnet, uppermost
side hole to reduce the potential of free movement. Should the
magnet become detached from the workpiece. Failure to do so may
result in personal injury.
Always wear approved eye protection, ear defenders and
recommended PPE when operating the machine.
Disconnect from the power source when changing cutters or working
on the machine.
Cutters and swarf are sharp, always ensure that hands are adequately
protected when changing cutters or removing swarf. Use a tool or
brush when necessary to remove any swarf or the cutter from the
arbor.
Before operating the machine, always ensure cutter-retaining screws
are secured tightly.
Regularly clear the work area and machine of swarf and dirt, paying
attention to the underside of the magnet base.