![background image](http://html.mh-extra.com/html/pro-point/9027525/9027525_manual_1607384018.webp)
9027525
Magnetic Drilling and Tapping Press
V1.0
18
For technical questions call 1-800-665-8685
1. Always ensure hands are well protected when handling cutters and
swarfs. Use a tool brush when necessary for cleaning.
2. Ensure work area is free from swarf, dirt or debris with special
attention to the magnet base.
DESCRPTION
EVERY OPERATION WEEKLY MONTHLY
Visual check of machine for damage
X
Operation of machine
X
Check brush wear
X
Check magnetic base
X
Check alignment of tool
X
Check grease
X
Check armature
X
Inspect and lubricate the tool when required. Only use light oil to lubricate
the tool. Other lubricants may not be suitable and could damage the tool
or cause a malfunction during use.
When not in use for an extended period, apply a thin coat of lubricant to
the steel parts to avoid rust. Remove the lubricant before using the tool
again.
NOTICE! NEVER use a penetrating oil to lubricate
the tool. Penetrating oil may act as a solvent
that will break down the grease and cause the tool
to seize up.
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
IMPORTANT! DO NOT pollute the environment by
allowing uncontrolled discharge of waste oil.