9. Never touch the circular saw disc or workpiece during or
immediately after use. They may be hot and could inflict a burn
injury.
10. The material and the motor housing can get very hot during
operation. Stop work until the mitre saw and the circular saw disc
both cool down to a safe temperature.
11. Do not cover the air vents. Proper cooling of the motor is
necessary to ensure normal life of the tool.
12. Never use a tool with a circular saw disc that is cracked or worn.
Change the circular saw disc before using it.
13. Avoid unintentional starts. Make sure the power switch is set to
OFF before connecting the mitre saw to a power supply.
14. Make sure any adjustment mechanisms are secure before using
the tool
KICKBACK PRECAUTIONS
Kickback is a sudden reaction to a pinched or snagged cutting
accessory caught on the material. The material can be ejected and
inflict a serious injury on the user or a bystander. Kickback can also
damage the tool or workpiece.
Kickback can be avoided by taking proper precautions:
1.
Maintain a firm grip on the material and position your body and
arms to allow you to resist a kickback. Kickback can propel the
material in the direction of the mitre saw's rotation.
a. Use a clamp to hold the material if the tool includes a
clamping system.
2. Use special care when working on corners, sharp edges or flexible
material. These workpieces have a tendency to snag the circular
saw disc.
3. Only use the circular saw disc designed for the tool.
4. Always make sure the work surface is free from nails and other
foreign objects. Cutting into a nail can cause and tool to jump and
damage the circular saw disc.
5. Maintain the circular saw disc's cutting edge. A dull edge is more
likely to slip from the workpiece.
8987646
2-SPEED SLIDING MITER SAW
V1.0
Assistance available at www.princessauto.com or 1-800-665-8685
Page 8
