ONE WORLD TECHNOLOGIES, INC.
1428 Pearman Dairy Road, Anderson, SC 29625 • Phone 1-800-525-2579
États-Unis, Téléphone 1-800-525-2579 • USA, Teléfono 1-800-525-2579
www.ryobitools.com
•
PIEZAS DE REPUESTO Y SERVICIO
Antes de solicitar servicio técnico o comprar piezas de repuesto, obtenga su modelo y número de serie de la placa de datos del
producto.
•
NÚMERO DE MODELO
_________________________
•
NÚMERO DE SERIE
_________________________
•
CÓMO OBTENER PIEZAS DE REPUESTO:
Las piezas de repuesto se pueden comprar en nuestro sitio en la red mundial, en la dirección
www.ryobitools.com
o llamando al
1-800-525-2579. Las piezas de repuesto también se pueden obtener en uno de nuestros Centros de Servicio Autorizados.
•
CÓMO LOCALIZAR UN CENTRO DE SERVICIO AUTORIZADO:
Puede encontrar los Centros de Servicio Autorizados visitando nuestro sitio en la red mundial, en la dirección
www.ryobitools.
com
o llamando al 1-800-525-2579.
•
CÓMO OBTENER SERVICIO O ASISTENCIA TÉCNICA AL CONSUMIDOR:
Para obtener Servicio o Asistencia Técnica al Consumidor, sírvase comunicarse con nosotros llamando al 1-800-525-2579.
•
PARTS AND SERVICE
Prior to requesting service
or purchasing replacement parts, please obtain your model and serial number from the
product data plate.
• MODEL NUMBER ____________________
• SERIAL NUMBER ____________________
• HOw TO OBTAIN REPLACEMENT PARTS:
Replacement parts can be purchased online at
www.ryobitools.com
or by calling 1-800-525-2579.
Replacement parts can also be obtained at one of our Authorized Service Centers.
• HOw TO LOCATE AN AUTHORIZED SERVICE CENTER:
Authorized Service Centers can be located online at
www.ryobitools.com
or by calling 1-800-525-2579.
• HOw TO OBTAIN CUSTOMER OR TECHNICAL SUPPORT:
To obtain Customer or Technical Support please contact us at 1-800-525-2579.
A18WS07P
RYOBI
®
is a registered trademark of Ryobi Limited used under license.
•
PIÈCES ET SERVICE
Avant de faire la demande de service ou l’achat de pièces de remplacement, veuillez obtenir le numéro de série du modèle à partir
de la plaque de données du produit.
•
NUMÉRO DE MODÈLE
_____________________
•
NUMÉRO DE SÉRIE
_____________________
•
COMMENT OBTENIR LES PIÈCES DE REMPLACEMENT :
Les pièces de remplacement peuvent être achetées en ligne sur le site
www.ryobitools.com
ou par téléphone au 1-800-525-2579.
Les pièces de remplacement peuvent être obtenues à un de nos centres de service autorisés.
•
COMMENT TROUVER UN CENTRE DE SERVICE AUTORISÉ :
Les centres de service autorisés peuvent être localisés en ligne au
www.ryobitools.com
ou en téléphonant au 1-800-525-2579.
•
COMMENT OBTENIR DE L’AIDE EN CONTACTANT LE SERVICE À LA CLIENTÈLE :
Pour contacter le service à la clientèle pour une question technique ou pour tout autre renseignement, veuillez nous téléphoner
au 1-800-525-2579.
Ryobi
®
est une marque déposée de Ryobi Limited utilisée sous licence.
Ryobi
®
es una marca comercial registrada de Ryobi Limited y es empleada mediante autorización.
A18WS07P
A18WS07P
WARNING:
To reduce the risk of injury, do not attempt to use this
product until you have read thoroughly and understand
completely this operator's manual and the operator's
manual for the WS730 Tile Saw.
UNPACKING
This product requires assembly.
n
Carefully remove the product from the box. Make sure
that all items listed in the packing list are included.
n
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
n
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
n
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Failure to heed
this warning could result in serious personal injury.
PACKING LIST
1.
water tray
support bracket, front, labeled “1”
2. water tray support bracket, back, labeled “2”
3. Stand leg, front, labeled “1” (2)
4. Stand leg, back, labeled “2” (2)
5. Hex head bolt, 8 mm x 65 mm (2)
6. Flat washer, 8 mm (2)
7. Nylock nut, 8 mm (2)
TOOLS NEEDED
Adjustable wrench or 8 mm wrench (2)
ASSEmbLING THE STAND
See Figures 1-3.
The support brackets and stand legs have corresponding
numbers for easy assembly.
n
Insert stand legs, labeled “1”, into end tubes of the
support bracket labeled “1”. Angled ends of stand legs
should face away from each other so they ressemble a
“V”. Align holes for hardware. Repeat with second support
bracket and legs labeled “2”.
n
Line up holes in bracket and leg, placing narrow bracket
tubes inside wide bracket tubes. Install hardware through
holes as shown.
n
Using wrenches, tighten nut on inside of each leg
assembly.
n
Turn the water tray from the wS730 over. Face widest side
of assembled bracket toward front of water tray. Snap
stand assembly into grooves on underside of water tray.
Turn water tray and stand into upright position.
n
Be sure the tile saw is on level ground and the stand is
sturdy before use.
2
2
1
1
1
1
2
2
983000-562
9-8-08 (REV:00)
ASSEmbLY mANUAL
TILE SAW STAND
A18WS07P
water tray
support bracket
(front “1”)
stand LeGs
(front “1”)
FOR USE ONLY WITH THE RYObI
WS730 TILE SAW
SAVE THESE INSTRUCTIONS
Fig. 2
Fig. 3
water tray
support bracket
(back “2”)
Fig. 1
stand LeGs
back “2”
hoLes
water tray
front
assembLed
stand
front
WS730_promotional stand.indd, Spread 1 of 2 - Pages (4, 1) 9/5/2008 10:52 AM
