8. Always handle the circular saw disc with care when mounting or
removing it.
9. Remove adjusting keys and wrenches before using the tool. The
tool may eject an attached wrench or a key and cause an injury to
you or a bystander.
POWER TOOL PRECAUTIONS
1.
Do not use any power tool with a malfunctioning power switch or
control. A power tool that fails to respond to the controls is
dangerous and can cause an injury. A qualified technician must
repair and verify the power tool is operating correctly, before it can
be used.
2. Shut the power off and disconnect the mitre saw from the power
supply (if possible) before making any adjustments, changing
accessories, cleaning, servicing or when storing. Such preventive
safety measures reduce the risk of starting the tool accidentally.
3. Never force the mitre saw. Excessive pressure could break the
tool, resulting in damage to your workpiece or serious personal
injury. Excessive pressure is the cause if your tool runs smoothly
under no load, but roughly under load.
4. Check if the mitre saw's moving parts are misaligned or binding
before each use. Correct the issue before using the mitre saw to
avoid an injury or damage to the tool.
5. Always be aware of the position of your hands relative to the mitre
saw. Avoid awkward hand positions where a sudden slip could
cause a hand to move into the circular saw disc. Never reach
behind or beneath the mitre saw.
6. Only use accessories that are specifically designed for use with
the mitre saw. Ensure the circular saw disc is tightly installed.
7.
Only use the circular saw disc that exceeds the Speed rating (see
Specifications).
8. Before using the mitre saw on a workpiece, test the mitre saw by
running it at the highest speed rating for at least 30 seconds in a
safe position. Stop immediately if there is any abnormal vibration
or wobbling. Check the tool to determine the cause.
V1.0
2-SPEED SLIDING MITER SAW
8987646
Page 7
Assistance available at www.princessauto.com or 1-800-665-8685
