Orion
Machine Manual
Revision 3.1
Sentry HP/ LP Flex Stretchwrapper
21 May 2020
System Operation
Page 3-31
Start Settings Screen
This is the Start Settings screen. On this screen, you may set the amount of time, in milli-
seconds that the start button must be pressed before the machine starts. You can also set
the automatic restart parameters.
Figure 3 - 26
The Start Settings
Screen
Table 3-22. The Start Delay Screen Button Descriptions
STATE 1
DESCRIPTION
STATE 2
START DELAY
Press this button to modify the Start Delay value, in terms of milliseconds. This
value determines the amount of time that the Start pushbutton must be pressed
before the machine will start. Min - 500 ms Max - 5000 ms
AUTOMATIC RESTART
DISABLED
Press this button to enable or disable automatic
restart mode.
AUTOMATIC RESTART
ENABLED
AUTOMATIC RESTART
CYCLES
Press this button to set the number of automatic restart cycles.
AUTOMATIC RESTART
DELAY
Press this button to modify the Automatic Restart Delay value, in seconds. This
value determines the amount of time that the machine waits between automatic
restart cycles.
BACK
Press this button to go to the Machine Setup screen.
