Machine Manual
Orion
Sentry HP/ LP Flex Stretchwrapper
Revision 3.1
System Operation
21 May 2020
Page 3-8
Maintenance Prompt
This is the Maintenance Prompt Screen. When preventative maintenance is required the
prompt and picture of the maintenance is displayed. Press Acknowledge to confirm that
the procedure was completed and reset the counter. Press Snooze to delay the counter for
100 cycles before the prompt re-displays.
Figure 3 - 8
The Maintenance
Prompt Screen
Table 3-3. The Maintenance Prompt Screen Button Descriptions
STATE 1
DESCRIPTION
ACKNOWLEDGE
Press this button to acknowledge the required maintenance prompt as completed.
SNOOZE
Press this button to snooze the required maintenance prompt. The prompt will
remain in the alarm list and redisplay after 100 cycles and re-display until it is
acknowledged.
