Machine Manual
Orion
Sentry HP/ LP Flex Stretchwrapper
Revision 3.1
System Operation
21 May 2020
Page 3-30
Machine Setup Screen
This screen is used when setting up the initial machine configuration. The technicians who
assembled you machine already set the type of machine you have on this screen. You will
not need to make any changes on this screen in day-to-day use.
Figure 3 - 25
The Machine Setup
Screen
Table 3-21. The Machine Setup Screen Button Descriptions
STATE 1
DESCRIPTION
STATE 2
SELECT SENTRY
CARRIAGE
Press this button to select the Sentry Carriage.
SELECT SENTRY
CARRIAGE
SELECT ORION
CARRIAGE
Press this button to select the Orion Carriage.
SELECT ORION
CARRIAGE
SELECT TURNTABLE
Press this button to select that the machine is a turn-
table machine.
TURNTABLE
SELECTED
INSTA-CUT DISABLED
Press this button to activate or de-activate Insta-
Cut.
INSTA-CUT ENABLED
DEFAULT SECURITY
Press this button to go to the Security Settings Screen. See “Maintenance Prompt”
on page 3 - 8.
START SETTINGS
Press this button to go to the Start Settings Screen. See “Start Settings Screen” on
page 3 - 31.
FACTORY DEFAULTS
Press this button to go to the Factory Defaults Screen. See “Factory Defaults
Screen” on page 3 - 32.
MAXIMUM SPEED
Press this button to go to the Maximum Speed Screen. See “Maximum Speed
Screen” on page 3 - 33.
