Pro-Form XP Whirlwind 320, User Manual

Page: 8 / 24

8
6
6. While a second person holds the Upright (2)
near the Frame (1), connect the Reed Switch
Wire (31) to the Extension Wire (39).
Tip: Do not pinch the Reed Switch Wire (31)
or the Extension Wire (39).
Set the Upright (2)
on the Frame (1). Attach the Upright with three
M10 x 17mm Screws (55) and three M10 Split
Washers (54).
55
54
54
55
55
2
1
39
31
7
7. The Console (3) can use four D batteries (not
included); alkaline batteries are recommended.
Do not use old and new batteries together or
alkaline, standard, and rechargeable batter-
ies together.
IMPORTANT: If the Console has
been exposed to cold temperatures, allow it
to warm to room temperature before insert-
ing batteries. Otherwise, you may damage
the console displays or other electronic
components.
Remove the battery covers from the back of the
Console (3), and insert batteries into the battery
compartments.
Make sure to orient the bat-
teries as shown by the diagrams inside the
battery compartments.
Then, reattach the bat-
tery covers.
To purchase an optional power adapter, call
the telephone number on the cover of this
manual. To avoid damaging the console,
use only a manufacturer-supplied power
adapter.
Plug one end of the power adapter into
the receptacle inside the battery compartment
on the console; plug the other end into an outlet
installed in accordance with all local codes and
ordinances.
3
Battery
Cover
Battery
Cover
Receptacle