12
11
Avoid pinching the
Main Wire (41)
5
63
41
4
11. Untie and discard the wire tie on the Main
Wire (41).
While a second person holds the Console (5)
near the Upright (4), plug the Main Wire (41) into
the receptacle on the Console.
The connector on the Main Wire (41) should
slide easily into the receptacle and snap into
place. If the connector does not slide easily into
the receptacle, turn the connector and try again.
If you do not connect the connector properly,
the console may become damaged when you
use the exercise bike.
Insert the excess wire into the Upright (4).
Tip: Avoid pinching the Main Wire (41). Attach
the Console (5) to the Upright (4) with four
M4 x 15mm Self-tapping Screws (63); start all
the Self-tapping Screws, and then tighten
them.
12
12. Identify the Right Pedal (29).
Using an adjustable wrench, firmly tighten the
Right Pedal (29) clockwise into the right arm of
the Crank (40).
Firmly tighten the Left Pedal (not shown)
counterclockwise into the Left Crank Arm
(not shown). IMPORTANT: You must turn the
Left Pedal counterclockwise to attach it.
Then, adjust the strap (E) on the Right Pedal
(29) to the desired position, and press the
end of the strap onto the tab (F) on the Right
Pedal. Adjust the strap on the Left Pedal (not
shown) in the same way.
29
E
F
40
Summary of Contents for 235 CSX
Page 4: ...4 STANDARD SERVICE PLANS...