![background image](http://html1.mh-extra.com/html/pro-form/235-csx/235-csx_user-manual_1605637023.webp)
23
HOW TO ADJUST THE DRIVE BELT
If the pedals slip while you are pedaling, even while
the resistance is adjusted to the highest level, the drive
belt may need to be adjusted.
To adjust the drive belt, first unplug the power
adapter. Then, you must remove the right pedal, the
right lock ring, and the right shield as described below.
Using an adjust-
able wrench, turn
the Right Pedal (29)
counterclockwise
and remove it. Then,
using a standard
screwdriver, release
the tabs around the
edge of the right Lock
Ring (23), and then
remove it from the
Right Shield (22).
See assembly step 5 on page 9. Using a standard
screwdriver, release the tabs along the bottom edges
of the Rear and Front Upright Covers (19, 20), remove
the two M4 x 12mm Screws (57), and then remove the
Rear and Front Upright Covers.
See the EXPLODED DRAWING on page 27.
Identify the Left and Right Shields (21, 22). Remove
all of the screws from the Left and Right Shields; there
are two sizes of screws in the shields—note which
size of screw you remove from each hole. Then,
gently remove the Right Shield.
Next, loosen the Adjustment Screw (47). Then, tighten
the Idler Screw (45) until the Drive Belt (59) is tight.
When the Drive Belt (59) is tight, tighten the
Adjustment Screw (47).
Then, reattach the left and right shields, the right lock
ring, and the right pedal.
22
23
29
45
47
59
Summary of Contents for 235 CSX
Page 4: ...4 STANDARD SERVICE PLANS...