10
Create a Panel Cut and insert the LogiTouch into the panel from the front
Unit:mm [in.]
Attach the Installation Fasteners from Inside the Panel
The following figures show the four (4) fastener insertion slot locations. Insert
each fastener’s hook into the slot and pull it back until the hook catches.
Insertion Slots
Panel
Hook
• Tightening the screws with too much force can damage the
LogiTouch's plastic case.
• The necessary torque is 0.5Nm.
1.6 to 5.0
[0.06 to 0.2]
191.5 [7.54 ]
+1
–0
141.5 [5.57 ]
+1
0
+0.04
0
+0.04
0
under 4-R3