5
MIXER GRINDER
KMG-32
CAUTION!:
The mixer-grinder must be connected to a thermally protected outlet and it requires a
special wiring (12 AWG or heavier cable) to be connected. The distance between the
mixer-grinder and the main power supply should not exceed 66.6 ft (20 meters) long.
MIXING BLADES SPACER
A special nylamid
– Food contact approved engineering plastic - spacer (26) is added between the hopper fontal wall and mixing
blades (8). This spacer eliminate the stress applied to Mixing blades shaft (9) and improve the operation by reducing the excessive
movement and gap of mixing blades.
IMPORTANT!:
Replace it when gap between internal wall of hopper and the spacer exceeds 0.300
”,
especially in equipment used during long working hours (250 lbs. or more of product per day).
INSTALLATION DIAGRAM
It is necessary to assign the adequate space installation for the mixer-grinder according to the next dimensions.
ELECTRICAL CONNECTION
IMPORTANT!
The equipment must be correctly grounded to prevent possible damage by electrical shock
