PRITY KPW 24, Installation And Operation Manual

Page: 34 / 64

34
TO AVOID ANY PROBLEMS IN THE PELLET STOVE OPERATION, IT
IS NECESSARY TO READ CAREFULLY THIS PASSPORT PRIOR TO ITS
INSTALLATION AND USAGE.
1. DESCRIPTION
Prity pellet appliances are designed to meet your requirements for comfort and
uniform heating of your home.
They function as a solid fuel using appliance, connected to a dedicated chimney for
disposal of flue gases.
Connection to the chimney as well as to the constructed Water Heating System (WHS)
with installed capacity corresponding to the heat loss of the respective residence shall be
performed by licensed specialists and people in charge with the capacity to be held liable
in tort, upon observation of all local, national and European standards for provision of
safety, functionality, convenience and aesthetics.
Unlike the ordinary solid fuel appliances, pellet stoves can work in a continuous
automatic mode of fuel supply, which is the reason when choosing the model not to resort
to higher capacity stove to cover potential heat losses due to dying down combustion
process.
Sometimes during the start - up a customized setting of the proportion of the fuel and
oxygen demand is necessary and it depends on the pellets’ quality, chimney draught and
air supply.
1.1. Delivery and unpacking
The pellet stove is shipped by the manufacturer installed onto a wooden pallet, packed
with stretch wrap and wooden structure. Upon purchase, please, inspect the product
exterior for any visible damage due to transportation. Verify the integrity of the panoramic
glass, door seals and its proper closing with the door handle.
All pellet appliances “Prity” have been tested and set - up under laboratory conditions,
which is the reason for any potential presence of traces of combustion process and pellets.
The firebox will contain:
Supply cable 1 pcs.
Firepot 1 pcs.
Ash pan 1 pcs.
Control module (display) 1 pcs.
Adjustable feet 4 pcs.
Operation manual 1 pcs.
Warranty card 1 pcs.