PRITY KPW 24, Installation And Operation Manual

Page: 53 / 64

53
To see again the warning message, touch the warning code in the top left corner. To
res et the signal, the problem must be resolved. In the example above, the battery must
be replaced.
IMPORTANT! In case of warning, the heating device will still operate (in
some cases it may have limited functions).
Alarms and warnings, which can be displayed on the control panel, the potential
reasons for their occurrence and the possible variants for their elimination are described
below:
Code Possible reasons Actions
A002
Reached maintenance service
period
Time before servicing runs out. Contact a
service station for regular maintenance
service.
A003
Cleaning! Warning flue gas
temperature threshold.
Cleaning of the heat - exchanging pipes,
inspection openings, flue gas fan, stove -
pipes and chimney is required.
A004 Depleted battery
Depleted battery. Contact the service
station for replacement.
A005
Fan speed sensor
Malfunction of the fan speed sensor.
Contact the service station.
E001 Poor connection with the display Contact the service station.
E101
Fire situation
Dangerous overfilling of the firepot after
unsuccessful ignition.
Clean and restart.
E102 Shortage of combustion air
1. Clean the firepot, heat - exchanging
pipes, stove - pipes and the chimney.
2. Provide wind - resistant shelter for the
chimney.
3. Inspect the air intake pipe.
4. Inspect for back aspiration.
E105
High temperature in the fuel
hopper
Failure or disconnected hopper
temperature sensor. Contact the service
station.
E106 Failure of water sensor
Failure or disconnected water
temperature sensor. Contact the service
station.