PRITY KPW 24, Installation And Operation Manual

Page: 54 / 64

54
E108
Triggered protective hot water
thermostatic switch
Bleed the water system. Inspect the
pump, filter and thermostatic heads.
Reset the alarm. If the error persists
contact the service station.
E109 Clogged chimney
Triggered pressostat because of a
clogged chimney. Clean stove - pipes and
the chimney! Reset and if the error
persists, look for a service station.
E110 Room temperature sensor
Failure or disconnected room
temperature sensor. Contact the service
station.
E111 Flue gas sensor
Failure or disconnected flue gas sensor.
Contact the service station.
E113
High flue gas temperature and
poor heat exchange rate
Clean the firebox from any cinder, the
heat - exchanging pipes, the inspection
openings and turbolators.
E114 No fuel
Inspect for presence of pellets and for
normal operation of the delivery auger.
E115 Error in the controller Contact the service station.
CAUTION:
1. In cases of installation and filling up of a newly - constructed system
with cold water it is recommended to wait for 1 hour before the first
ignition so that the circulation water can be tempered in order to
prevent any excessive condensation.
2. During installation of a new device it is possible to find out that the
pump is blocked due to congealing. To unblock it, please watch the
respective video from the company’s web site: https://prity - bg.com/
MENU: USEFUL INFORMATION → PREPARATION OF THE PELLET STOVE →
UNBLOCKING THE STICKED WATER PUMP