manualshive.com logo in svg

Prism Sound ADA-8, Module Reference

Share
Download
Prism Sound ADA-8 Module Reference Download Page 54

Prism Sound ADA-8XR Multi-channel A/D D/A Converter   Module Reference - Revision 1.01 

© Prism Media Products Limited, 2001-2005    

Page 3.53 

When this store is recalled each FireWire I/O Module is configured for 2 in / 8 out operation. 
Giving a total of 16 output channels and 4 dummy input channels (the dummy input channels 
are required to maintain synchronization between FireWire I/O modules). 
 
Path 1 is configured for digital to analogue conversion. The path synchronization source and 
sample rate are controlled by the workstation. 
 
Path 2 is configured for digital to analogue conversion. The path synchronization source and 
sample rate are controlled by the workstation. 
 
See sections 9.7 and 9.8 for further information on controlling the ADA-8 from the workstation. 
 
 

9.6.4  Analogue to Digital / Digital to Analogue Cascade 

 
If you have an ADA-8 XR that is fitted with two FireWire I/O Modules, an Analogue Line Input 
Module, and an Analogue Line Output module the “FWire AD/DA Casc” store will appear in 
the store banks when the Factory Stores are recalled. Use this store for common A/D and D/A 
applications with sample rates up to and including 192kHz. 
  
When this store is recalled each FireWire I/O Module is configured for 4 in / 4 out operation. 
Giving a total of 8 input channels and 8 output channels. 
 
Path 1 is configured for analogue to digital conversion. The path synchronization source and 
sample rate are controlled by the workstation. Input channels 1 to 4 are handled by the 
FireWire I/O Module in DIO Slot 1 and input channels 5 to 8 are handled by the FireWire I/O 
Module in DIO Slot 2. 
 
Path 2 is configured for digital to analogue conversion. The path synchronization source and 
sample rate are controlled by the workstation. Output channels 1 to 4 are handled by the 
FireWire I/O Module in DIO Slot 1 and output channels 5 to 8 are handled by the FireWire I/O 
Module in DIO Slot 2. 
 
See sections 9.7 and 9.8 for further information on controlling the ADA-8 from the workstation. 
 

Summary of Contents for ADA-8
































































Reviews:

No comments

Brands by name

Popular brands

Load more brands