Printed in USA 4/06 © 2006
18
625-525revG-EN
Steamer
625-OS
When
Monthly
Tools
McD
®
All Purpose Super
Concentrate (APSC)
McD
®
Sink Pak Sanitizer
McD
®
Delimer™ (as required)
Clean Sanitized Towel
16 oz Cup
Steamer Brush
Heat Resistant Gloves
Monthly Cleaning
1.
Turn unit power On/Off switch to OFF position and unplug steamer from
power source.
“PROCEED WITH CAUTION” – CAUTION UNIT IS
STILL HOT
.
2.
While wearing protective gloves, remove top cover, top cover plate and
venture plate and wash in a solution of
McD
®
APSC
made up in the back
sink. Rinse with clean water, sanitize with
McD
®
Sink Pak Sanitizer
(KAYQUAT
®
)
, and air dry.
3.
Using a 16 oz cup, dissolve one packet of
McD
®
Delimer™
with 16 oz of
hot water. Pour the delimer into the steam chamber. Add more water as
necessary to cover the base of the steam chamber.
NOTE: Use one packet for monthly cleaning procedure and dispose of
the unused solution once the procedure is completed. In hard water
areas that require daily, biweekly or weekly cleaning, partial packets
can be used. Two teaspoons of McD Delimer™ can be dissolved in a
small coffee cup with hot water. The packet can be used for 4
applications. However it is not recommended to leave open packets lying
around.
4.
Let the delimer solution soak for at least 15 minutes. Delimer is more
efficient when the unit is hot.
5.
With the delimer in the steam chamber, clean the water tube. Dip a steamer
brush in the delimer. Insert the brush about 1" into the water tube. Scrub the
tube for 30 seconds. This will clean the water tube walls and remove any
debris.
6.
Using a clean sanitized towel, wipe the delimer solution from the steam
chamber. Rinse the chamber with clean water and wipe again with a clean
sanitized towel to remove any remaining delimer residue.
If deposits remain, make fresh solution and repeat Steps 3 – 6.
7.
Wash all external surfaces of the steamer with a solution of
McD
®
APSC
at
the back sink. Using the
McD
®
APSC
spray bottle, spray directly onto a
clean sanitized towel and wipe the unit clean.
DO NOT SPRAY DIRECTLY ON THE UNIT OR USE ABRASIVE
CLEANERS.
8.
Reassemble the steamer.
9.
Turn unit on. When unit is preheated, run a minimum of four cycles to prime
the unit and remove any residual cleaner.
