507 329
PUBLICATION DATE 05/05
USER´S MANUAL
11
„E“ MACHINES
TILTING THE MACHINE BACKWARDS TO SUFFICIENT POSITION FOR LOADING THE LINEN
The machine can be tilted backwards to any position. Should it be required, the loading can be done in any
position between 0° and 15° tilting angle. To tilt press „door opening“ - button (see fig.3.B pos.6) and
„backward tilting“ - button (4) simultaneously. After cca 10s the machine starts tilting. Tilting can be interrupted
if you release any of pressed button (see fig.3.B pos.4, 6). When the extreme position is reached, tilting is
stopped automatically and pressing the buttons again will not influence the machine any more.
LOADING THE LINEN INTO THE MACHINE
Fill the machine with linen by automatic loading. To lay the linen in the drum easily, use the function of the
drum tilting while loading the linen. For the drum rotating in tilted position press and hold the button for the
drum rotating in required direction (see fig.3.B. pos.1) or (2) and the button for the door opening (6) on the
controller at the same time.
4.4. CLOSING THE DOOR
WARNING
NEVER PUT FINGERS BETWEEN DOOR SEALING AND DRUM, AVOID POSSIBLE INJURY!
Close the door carefully and secure it properly:
„A“ MACHINES:
By turning the handle up.
„B“ MACHINES:
By pushing the handle towards the machine.
„C“ MACHINES:
By closing the door forcefully, so that the lock latch snaps in.
„D“ MA „E“ MACHINES:
Lock-off mechanical bolt, close the door manually. The door is
secured automatically.
When you close the drum door manually, close it slowly, do not slam it quickly. Doing this you
avoid the situation when the door bolt locks but the door bounces back and remains open.
In such a case open the door temporarily (see „Installation and maintenance manual“).
MACHINE EQUIPPED WITH AUTOMATIC DOOR CONTROL SYSTEM:
Press and hold the button for closing the door (see fig.3.B. pos.5). The door will close completely and the
door lock will be secured. Release the button (see fig.3.B. pos.5).
You can only close the drum door when the machine is in the backward tilted position or after
tilting the machine back to basic position.
When the door is closed in the forward tilted position, then for safety reasons it is not possible to
tilt the machine back to basic position or use other functions. Open the door temporarily, (see
„Installation and maintenance manual“) and go on according to further procedure.
TILTING THE MACHINE TO THE BASIC POSITION
For tilting the machine to basic position press and hold the button for tilting (see fig.3.B. pos.3) and the
button for the door opening (6) on the controller at the same time. If you release any of these pressed
buttons (see fig.3.B. pos.3, 6) the tilting will be interrupted. When the basic position is reached, the green
pilot light (see fig.3.B. pos.7) will light up on the programmer panel (7).
Tilting the machine from the backward tilted position to the basic position is possible either with
closed or with open door. If the drum door was not closed in the backward tilted position after
loading the linen, close it.
4.5. PROGRAM SELECTION
Choose one of the available wash programs, best corresponding to the quality of linen and allowed wash
temperature in the wash load. Choose proper wash program with button PROGRAM SELECT on the control
panel. There are various wash programs indicated on the control panel. Selection of the program determines
temperature and time for washing and rinsing. If you wish, it is possible to adapt the wash programs.
(See programming manual).
!
