3 First Steps |
3.6 Adjusting the Illumination Properties
Primotech | Document 430055-9044-008 V.1.0; 03 / 2014
21
3
To view the sample in more detail, select a higher magnification and repeat
step 2.
4
You can adjust the torque of the focus wheel by tightening or loosening the
ring between the focus wheel and the microscope stage
3
.
3.6 Adjusting the Illumination Properties
You can adjust the following illumination properties:
¢
Brightness of transmitted illumination
¢
Brightness of reflected illumination
¢
Color of reflected illumination
¢
Oblique illumination for reflected illumination
INFO
Reflected illumination is not available for Primotech D/POL Conoscopy.
3.6.1 Adjusting the Illumination Brightness
You can freely adjust the brightness of either the reflected light or transmitted light
(if available):
2
1
1
Transmitted light
2
Reflected light (not available for Primotech D/POL Conoscopy)
The LEDs on the corresponding side of the microscope stand indicate the
brightness of the illumination. You can adjust the brightness of the light sources
independently or use both sources concurrently.
