l
To use DHCP, select “Obtain IP address automatically”. You must also enter the DHCP Host Name.
l
To use static IP, select “Use the following IP configuration” and enter the IP Address, Subnet Mask, and
Default Gateway.
NOTE:
Be sure to write down and file the changes you make to network configuration settings. Once
the default static IP address is changed, the factory-default IP address will no longer work and
you must use the new settings to access the transmitter configuration.
9. (Optional)Under the Network settings, there is a location for the NTP Server. Enter the IP address of the NTP server
as the time source.
10. Click
OK
.
11. Save the settings by clicking
Apply Settings
on the configuration frame.
12. The transmitter will automatically reboot/restart. The window below is displayed.
Figure 12: Rebooting the Unit
Set a Temporary IP Address for the Transmitter LAN Interface
In the event that you do not know the IP address of the transmitter, you can use your laptop to assign the transmitter a
temporary IP address. Then, using the temporary IP address, you can access the transmitter’s Network Settings
configuration screen. You may need to perform this procedure if you have forgotten the transmitter’s IP address or if the
transmitter is set to use DHCP.
NOTE:
The temporary IP address assigned using this procedure is only accessible as long as the transmitter is
powered. If power is lost before the desired IP address is configured, you will need to repeat this procedure.
Primex Wireless
UK 1/2 and 5 Watt Transmitter - External Antenna Installation & User Guide
30
