Install GPS Receiver
Complete the steps below to install a GPS receiver. A GPS receiver is required if your system will use GPS as its time source.
Mounting Kit Contents
The GPS Receiver mounting kit is supplied with the following parts. If any of these items are missing, contact Primex
Wireless.
Part
Quantity
Mounting bracket
1
GPS 18 LVC and connector
1
M3 x 0.5 x 6 mm pan head screws
2
#6 x 3/8 sheet metal screw
3
Suction cups
3
U-bolt with nuts for mounting on 1” (2.54 cm) pole
1
Mounting the GPS Receiver
1. Verify the kit contents and the installation location meets the installation guidelines.
2. From the outside of the building, route the GPS cable.
l
Internal antenna transmitter:
route through a drilled hole into the building.
l
External antenna transmitter:
route through a 3/4" drilled hole into the building.
3. Assemble and mount the GPS receiver unit to an inside of a window (not Low-E glass), an outside pole, or rooftop.
The mounting location is required to have a clear view of the sky.
CAUTION:
Be sure to follow local building code requirements when attaching the GPS unit to the inside of a
window. Clean the windowpane before using the suction cups for attachment.
4. Route the GPS cable and connect to transmitter 5 Watt and 30 Watt model to the transmitter exciter)"GPS IN"
connection.
Primex Wireless
UK 1/2 and 5 Watt Transmitter - External Antenna Installation & User Guide
24
