Configure Transmitter Network and NTP Time Settings
Complete the steps below to configure a transmitter for NTP time.
1. Located on the back of the transmitter, set both dip switch 1 and 2 to the up position.
2. Insert one end of an Ethernet cable into the Ethernet port located on the back of the transmitter and the other end
into a port on your network.
3. Apply power to the transmitter.
4. From a PC, open a Web browser and in the address bar type in the IP address of the transmitter: http://192.168.1.1
NOTE:
The PC is required to be on the same subnet as the transmitter (for example: 192.168.1.10).
5. The Connect To dialog window is displayed.
NOTE:
If the transmitter IP address has been changed from the factory default address, see topic Set a Temporary IP
Address for the XR Transmitter LAN Interface.
Figure 9: Connect To Dialog Box
6. Leave both user name and password blank, click
OK
to log into the transmitter. The XPort Device Configuration
Manager screen is displayed.
Primex Wireless
UK 1/2 and 5 Watt Transmitter - External Antenna Installation & User Guide
28
