PRIMERGY TX300 S3, Operating Manual

Page: 56 / 125

56 Operating Manual
TX300 S3
Connecting Devices to the Server Hardware Installation
The corresponding displays are explained in section “Rear of Server” on
page 65 .
I
Some of the devices connected require special software (e.g. drivers)
(see documentation for the connected device).
Ê Connect up the devices.
You can find an additional USB port on the front of the server (see figure 22 on
page 61 ).
Connecting the keyboard, mouse and monitor
Ê Connect the monitor, the keyboard and mouse to the standard ports of the
server (see
figure 18 on page 55 ).
Ê
Connect the power cable of the monitor to a grounded mains outlet of the in-
house mains and/or into the mains socket strip of the rack.
V
CAUTION!
The rated current for the monitor can be found on the technical data label
on the monitor or in the operating manual for the monitor.