PRIMERGY TX300 S3, Operating Manual

Page: 11 / 125

TX300 S3
Operating Manual 11
Introduction Features
ServerStart
The ServerStart software supplied allows you to configure your PRIMERGY
server quickly and purposefully. User-guided menus are available for installing
the server operating system (for further details see
section “Configuring the
Server” on page 73 ).
Service and support
PRIMERGY servers are service-friendly and modular, enabling quick and easy
maintenance.
The handles and locks (touch point) of the different hot-plug components are
colored green to ensure simple and immediate recognition.
In order to avoid damage to components by incorrect handling when they are
being installed and removed, green highlighting also identifies the areas of all
components that can be touched without causing damage to the respective
component.
PRIMERGY diagnostic LEDs fitted on the system board show which component
on the board (memory module, CPU, fan) is not functioning properly.
The Flash EPROM program supplied with the Fujitsu Siemens Computers
utilities supports a fast BIOS update. The optional
RemoteView remote testing
and diagnostic system enables you to remotely maintain your PRIMERGY
TX300 S3 server. This enables remote diagnosis for system analysis, remote
configuration and remote restart should the operating system or hardware fail.