manualshive.com logo in svg

PRIMERGY TX300 S3, Operating Manual

Share
Download
PRIMERGY TX300 S3 Operating Manual Download Page 107

TX300 S3

Operating Manual

107

Hot plug components

Opening/Closing the Housing

8.5

Opening/Closing the Housing

V

CAUTION!

The device can be seriously damaged if it is opened without authori-
zation or if repairs are attempted by untrained personnel. 

Please observe the safety information in 

chapter “Important Information” 

on page 19

.

V

CAUTION!

The side/housing cover must be reinstalled as soon as possible due to 
cooling, to comply with applicable EMC regulations (regulations on 
electromagnetic compatibility) and to protect against fire. The housing 
must not be left uncovered for more than 60 minutes.

Figure 38: Removing the Side Cover

Ê

Pull the locking lever as far as it will go (1) and push the left side cover about 
2 cm in the direction of the arrow (2).

Ê

Remove the side cover (3).

The cover is replaced in the reverse order.

2

1

3

Summary of Contents for TX300 S3






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands