Primera CD Color Printer II User Manual Download | Manualshive

Page: 18 / 56

background image

14 Using the CD Color Printer with Windows

3. Double-click on the

Add Printer

icon. This will launch the

Add Printer Wizard. Click

Next

, then click

Next

again.

4. Click

the

Have Disk

button.

5.

Click

Browse

, select your CD-ROM drive, and open the

folder named

Windows and NT Software

.

6.

For Windows 95/98, open the

Windows Driver

folder and

select the file named

CDCOLOR2.INF.

For Windows NT,

open the

NT Driver

folder and select the file named

OEMSETUP.INF.

(

Example

: If you are installing the

Windows 95/98 driver, and your CD-ROM drive is drive
D:, then you would browse to: D:\Windows and NT
Software\Windows Driver. You would then select the file
named CDCOLOR2.INF.) Follow the on-screen instructions
to complete installation. Once installed, the ÒCD Color
Printer IIÓ icon will appear in the PrinterÕs folder.

IMPORTANT!

Once the printer driver software is installed, the Image
Placement values labeled on your printerÕs rear panel must
be entered into the printer driverÕs Calibrate window (see
page 22). These values have been optimized specifically for
your printer and allow images to be centered on a CD when
printed.

NOTE:

Before installing updated printer driver versions, always delete the
existing printer driver version from your system. To do this, simply
select the printer driver icon from within the Printers folder, and
press the Delete key.

510198 Fargo/CD Color PrtrII 2/26/99 12:36 PM Page 14

«
...
16
17
18
19
20
...
»

Summary of Contents for CD Color Printer II

























































Reviews:

No comments

Related manuals for CD Color Printer II

Brand: Panasonic Pages: 3

Brand: Panasonic Pages: 4

7760DN - Phaser Color Laser Printer

Brand: Xerox Pages: 158

Brand: idp Pages: 104

Brand: A&D Pages: 16

Brand: Olivetti Pages: 82

Brand: OKIDATA Pages: 44

Brand: Oki Pages: 182

Brand: Xerox Pages: 233

Brand: Delta OHM Pages: 28

Brand: Go Pages: 3

Brand: Tinkerine Studio Pages: 17

Brand: Seiko Epson Pages: 301

Brand: Copystar Pages: 4

WorkCentre 5687 Series

Brand: Xerox Pages: 2320

VersaaLink B600

Brand: Xerox Pages: 170

Brand: Valentin Pages: 32

Brand: Xerox Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands