Prime DVST ULTIMA96H-16 User Manual Download Page 74

Page: 74 / 103

•

Instance Backup Widget : Backup a video.

Get Estimate

capacity

Recording stop

Recording

start

Backup Data

information

Selected DVR

Selected channel of
DVR

Select time and date

- Instance Backup is the function that save the recorded video on the PC from DVR

device.

- If you create Search View, automatically the information of the device will be loaded

as shown in the figure.

- You can choose the channel and device to be stored on the PC via combination box.

- If you change the time and date to be stored, automatically the file name will be also

changed to the time and date.

- Get Estimate for the selected date and time from the start time until the last day that is

stored on the PC estimated capacity is calculated and displayed.

※

It is possible to change and save to AVI and EXE as a supporting format in

configuration.(AUTO : EXE)

Appendix. A

Summary of Contents for DVST ULTIMA96H-16








































































































Search results

Summary of Contents for DVST ULTIMA96H-16

Reviews:

Related manuals for DVST ULTIMA96H-16

Brands by name

Popular brands

Prime DVST ULTIMA96H-16, User Manual

Search results

Summary of Contents for DVST ULTIMA96H-16

Reviews:

Related manuals for DVST ULTIMA96H-16

Brands by name

Popular brands