Prime DVST ULTIMA96H-16 User Manual Download Page 2

Page: 2 / 103

Thank you for using our product.

1. This is user's manual for H.264 960H 16/20/32CH Realtime DVR (Digital Video

Recorder).

2. This manual contains product specification and introduction, installation guide,

operating guide and other necessary matters for easy understanding. Users should
read this user's manual carefully for proper use.

3. Contents in this manual may be changed according to the specification change and

feature improvement without any notification.

4. This user's manual shall never be copied without prior agreement and violating this

may be a reason for legal punishment on piracy.

5. If there is any incorrect or insufficient content in this user's manual, notify it to

Customer Support Center.

Summary of Contents for DVST ULTIMA96H-16








































































































Search results

Summary of Contents for DVST ULTIMA96H-16

Reviews:

Related manuals for DVST ULTIMA96H-16

Brands by name

Popular brands

Prime DVST ULTIMA96H-16, User Manual

Search results

Summary of Contents for DVST ULTIMA96H-16

Reviews:

Related manuals for DVST ULTIMA96H-16

Brands by name

Popular brands