Pride Z11, Owner'S Manual

Page: 17 / 39

Z11 www.pridemobility.com 17
I I I . Y O U R P O W E R C H A I R
Figure 6. The Z11 Power Base (Foot Platform Removed)
MOTOR/BRAKE ASSEMBLY
CASTER BEAM
SEAT PEDESTAL
REAR SHROUD FASTENERS
YELLOW FASTENER
ELECTRICAL COMPONENTS
The electrical components are located within the power base. The ammeter and the charger power cord receptacle are
located on the right side of the power base. The main circuit breaker is located on the front of the battery tray. The charger
inhibit connector and the motor connectors are located on the power pod, inside the power base. See figure 7.
Ammeter: The ammeter displays the charger’s current output in amps. See VI. “Batteries and Charging.”
Charger Power Cord Receptacle: This is where the power cord plugs into the onboard charger. See VI. “Batteries and
Charging.”
Main Circuit Breaker: The main circuit breaker is a safety feature built into your power chair. When the batteries and the
motors are heavily strained (e.g., from excessive loads), the main circuit breaker trips to prevent damage to the motors and
the electronics. If the circuit trips, allow your power chair to “rest” for approximately one minute. Next, push in the circuit
breaker button, turn on the controller, and continue normal operation. If the main circuit breaker continues to trip repeat-
edly, contact your authorized Pride Provider.
CENTER SHROUD