22
www.pridemobility.com
Z11
V . C O M F O R T A D J U S T M E N T S
Armrest Width Adjustment
You can change each armrests width independently of the other.
NOTE: Changing the armrest width may increase the
overall width of your power chair.
To change the armrest width:
1. Locate the two armrest knobs on each side of the armrest
receiver bracket. See figure 15.
2. Loosen the knobs.
3. Slide the armrests in or out to the desired width.
4. Tighten the knobs.
Foot Platform Height
The foot platform height is easily adjusted to different heights
in 1/2-in. increments.
To raise or lower the foot platform:
1. Remove the nut and bolt from the foot platform bracket. See
figure 16.
2. Raise or lower the foot platform to the desired height.
3. Reinstall the nut and bolt into the foot platform bracket and
tighten.
Foot Platform Angle
You can adjust the angle of the foot platform with a hex key.
To adjust the foot platform angle:
1. Flip up the foot platform and locate the setscrew. See figure
17.
2. Turn the setscrew counterclockwise to raise the front of the
foot platform.
3. Turn the setscrew clockwise to lower the front of the foot
platform.
Figure 15. Armrest Width Adjustment
ARMREST KNOBS
Figure 16. Foot Platform Assembly
RETAINING PIN
BOLT
NUT
FOOT PLATFORM
BRACKET
FOOT PLATFORM
Figure 17. Bottom View of Foot Platform
SETSCREW
