38
www.pridemobility.com Luna Victory Series
V I I I . B A S I C T R O U B L E S H O O T I N G
DIAGNOSTIC FAULT CODES - LUNA VICTORY E
The diagnostic fault codes for your scooter are designed to help you perform basic troubleshooting quickly
and easily. A diagnostic fault code and error message will be displayed in the event one of the conditions
listed below develops.
NOTE: Your scooter will not run unless the fault code condition is resolved and the scooter has been
turned off, then turned back on.
FAULT CODE
CONDITION
SOLUTION
(1)
Battery charge is low.
Charge batteries as soon as possible.
If fault continues, contact your
authorized Pride Provider to have
batteries load tested.
(2)
Battery charge is too low.
Charge batteries.
(3)
The scooter's battery voltage is too
high to operate the scooter, or the
charger is still connected to the off-
board charger port.
Unplug charger and/or turn key off,
then back on again.
(4)
Current limit time out.
Turn the scooter off for a few min-
utes, then turn your scooter back on.
(5)
The manual freewheel lever is in the
(forward) freewheel position.
Remove the key from the key
switch, then push the manual free-
wheel lever to the drive (backward)
position and restart your scooter.
(6)
Throttle control lever not at center
position at start up.
Return the throttle control lever to
center position, turn scooter off then
back on.
(7)
Speed pot error.
Call your authorized Pride Provider
for assistance.
(8)
Motor volts error.
Call your authorized Pride Provider
for assistance.
(9)
Other internal errors.
Call your authorized Pride Provider
for assistance.
