34
www.pridemobility.com Luna Victory Series
POSITIONING BELT (OPTIONAL)
Your scooter seat may be equipped with an auto-type
positioning belt that can be adjusted for operator comfort. The
positioning belt is designed to help support the operator so that
he or she does not slide down or forward in the seat. The
positioning belt is not designed for use as a restraining device.
WARNING! The positioning belt should be
secured at all times. Never allow the
positioning belt to hang or drag on the floor as
it may become entangled.
To install the positioning belt (if required):
1. Remove the seat from your scooter.
2. Place the seat upside down so that you can see the bottom
of the seat base.
3. Use a wrench to remove the two rear bolts on the outermost
part of the seat bottom.
See figure 20
.
4. Insert the bolt through the appropriate ends of the
positioning belt and then reinstall the bolts back into the
seat frame.
5. Tighten the bolts.
To adjust the positioning belt for operator comfort:
1. Insert the metal tab on the right side of the belt into the
plastic housing on the opposite strap until you hear a
“click.”
See figure 22.
2. Pull the strap on the right side of the belt until it is secure,
but not so tight as to cause discomfort.
To release the positioning belt:
1. Press the push button mechanism on the plastic housing.
MANDATORY! Make sure the positioning belt
is properly secured to the scooter and is
adjusted for operator comfort before each
use.
MANDATORY! Inspect the positioning belt for
loose or damaged parts before each use of the
scooter. If you discover a problem, contact
your authorized Pride Provider for
maintenance and repair.
V I . C O M F O R T A D J U S T M E N T S
Figure 22. Positioning Belt
