background image

16

                                                     www.pridemobility.com                             Luna Victory Series

I I .   S A F E T Y

ELEVATORS

Modern elevators have a door edge safety mechanism that, when pushed, reopens the door(s).

If you are in the doorway of an elevator when the door(s) begin to close, push on the rubber door edge

or allow the rubber door edge to contact the scooter and the door will reopen.

Use care that pocketbooks, packages, or scooter accessories do not become caught in elevator doors.

NOTE: If your scooter’s turning radius is greater than 152,4 cm (60 in.) it may be difficult to maneuvre

in lifts and building entrances. Use caution when attempting to turn or maneuvre your scooter in small

spaces, and avoid areas that might pose a problem.

LIFT SYSTEMS/ELEVATION PRODUCTS 

If you will be transporting your scooter during travel, you may find it necessary to use a vehicle-mounted

lift system or elevation product to aid in transportation. Pride recommends that you closely review the

warnings, instructions, specifications, and safety information set forth by the manufacturer of the lift/

elevation product before using that product. 

WARNING! Not all lift systems/elevation products are rated for use with an occupied

mobility device. Pride recommends that you do not remain seated in your scooter when

it is being used in connection with any type of lift system/elevation product unless: 

That product is rated for occupied use by the manufacturer.

You are able to occupy your mobility device in strict conformity with the warnings,     

      instructions, specifications, and safety guidelines set forth by the manufacturer. 

WARNING! Always turn off the power to the scooter when you are being transferred via

an elevation product. Failure to do so may result in accidental throttle control lever

contact, resulting in unintended movement and personal injury or product damage.

BATTERIES

In addition to following the warnings below, be sure to comply with all other battery handling information. 

MANDATORY! Battery posts, terminals, and related accessories contain lead

and lead compounds. Wear goggles and gloves when handling batteries and

wash hands after handling.

WARNING! Scooter batteries are heavy. See specifications table. If you are

unable to lift that much weight, be sure to get help. Use proper lifting techniques

and avoid lifting beyond your capacity.

WARNING! Always protect the batteries from freezing and never charge a frozen

battery. Charging a frozen battery may result in damage to the battery.

WARNING! Connect the battery harnesses in the proper manner. RED (+) cables

must be connected to positive (+) battery terminals/posts. BLACK (-) cables must

be connected to negative (-) battery terminals/posts. Protective caps should be

installed over all battery terminals. REPLACE cables immediately if damaged.

BATTERY DISPOSAL AND RECYCLING

If you encounter a damaged or cracked battery, immediately enclose it in a plastic bag. Contact your local

waste disposal agency or your authorized Pride Provider for instructions on disposal and battery recycling,

which is our recommended course of action.

PREVENTING UNINTENDED MOVEMENT

WARNING! If you anticipate being seated in a stationary position for an extended period

of time, turn off the power. This will prevent unexpected motion from inadvertent throttle

control lever contact.

Summary of Contents for Luna Victory

















































Reviews: