background image

Luna Victory Series                                 www.pridemobility.com

21

Speed Adjustment Dial

This dial allows you to preselect and limit your scooter’s top speed.

The image of the tortoise represents the slowest speed setting.

The image of the hare represents the fastest speed setting.

Battery Condition Meter

When the key is fully inserted and turned clockwise to power up your scooter, this meter indicates the
approximate battery voltage strength. For further information on battery charging, see IV. “Batteries and
Charging.”

Status LED

The status LED alerts you to electrical problems that may occur with the scooter. The LED remains

constantly lit while your scooter is on. If your scooter develops an electrical problem, the status LED will

flash a code. See VIII. “Basic Troubleshooting” for flash codes.

Horn Buttons

These buttons activate a warning horn. Your scooter must be powered up for the horn to be operational.

Do not hesitate to use the warning horn when doing so may prevent accident or injury.

Turn Signal Buttons

Use these buttons to turn on the left and right turn signal (amber) lights.

Push the left button to activate the left turn signal light. The turn signal indicator LED located in the

battery condition meter will flash.

Push the right button to activate the right turn signal light. The turn signal indicator LED located in the

battery condition meter will flash.

The turn signals are timed to shut off automatically.

Lights Switch

This switch controls your scooter’s lighting system.

Toggle the switch forward to turn on the lighting system.

Toggle the switch rearward to turn off the lighting system.

WARNING! Scooter users are required to use their lights when visibility is restricted—day

or night.

Hazard Lights Switch

This switch activates the 4-way flashers on your scooter.

Toggle the hazard lights switch forward to turn on the flashers.

Toggle the hazard lights switch rearward to turn off the flashers.

I I I .   Y O U R   S C O O T E R

Summary of Contents for Luna Victory

















































Reviews: