background image

Luna Victory Series                                 www.pridemobility.com

15

I I .   S A F E T Y

INCLEMENT WEATHER PRECAUTIONS

Exposure of your scooter to inclement weather conditions should be avoided whenever possible. If

suddenly caught up in rain, snow, severe cold or heat while operating your scooter, proceed to shelter at

the earliest opportunity. Thoroughly dry your scooter before storing, charging, or operating your scooter.

PROHIBITED! Operating in rain, snow, salt, mist/spray conditions, and on icy/slippery

surfaces can cause damage to the scooter and electrical system. Maintain and store

your scooter in a dry and clean condition.

WARNING! Prolonged exposure to hot or cold conditions may affect the temperature of

upholstered and non-upholstered items on the scooter, possibly resulting in skin

irritation. Exercise caution when using your scooter in extremely hot or cold conditions

or when exposing your scooter to direct sunlight for prolonged periods of time.

FREEWHEEL MODE

Your scooter is equipped with a manual freewheel lever that, when engaged, allows the scooter to be

pushed. For more information about how to place your scooter into and out of freewheel mode, see III.

“Your Scooter.”

WARNING! When your scooter is in freewheel mode, the braking system is disengaged.

Disengage the drive motors only on a level surface. 

Ensure the key is removed from the key switch. 

Stand to the side of the scooter to engage or disengage freewheel mode. Never sit on a

scooter to do this.

After you have finished pushing your scooter, always return it to the drive mode to lock

the brakes. 

An added feature built into the scooter is “

push-too-fast

” protection which safeguards the scooter against

gaining excessive speed while in freewheel mode. 

“Push-too-fast” operates differently depending on which of two conditions exists: 

If the key is switched “off” while in freewheel mode, the scooter’s controller activates regenerative

braking when the scooter is pushed faster than a maximum threshold which has been preprogrammed.

In this case, the controller is acting as a speed governor.

If the key is switched “on” while in freewheel mode, you will encounter considerable resistance at any

speed. This prevents the scooter from gaining unwanted momentum should the manual freewheel lever

inadvertently be released while driving the scooter.

WARNING! Pride recommends that you do not disconnect the batteries when the scooter

is in freewheel mode as this may interfere with the function of the controller.

STAIRS AND ESCALATORS

Scooters are not designed to travel up or down stairs or escalators. Always use an elevator. 

WARNING! Do not use your scooter to negotiate steps or escalators.

DOORS

Determine if the door opens toward or away from you.

Use your hand to turn the knob or push the handle or push-bar.

Drive your scooter gently and slowly forward to push the door open. Or drive your scooter gently and

slowly backwards to pull the door open.

Summary of Contents for Luna Victory

















































Reviews: