WARNING!
Avoid electric shock risk when touching the equipment:
- Use only suitable power cable with earth connection;
- Never power the equipment to the mains socket without earth connection.
WARNING!
High voltage is present inside this equipment.
It can cause great damages and injuries.
Do not make any repair service inside the equipment without removing the plug
from the supply.
WARNING!
Much electromagnetic noise can cause instability to the equipment.
The equipment is provided with electromagnetic interference filters that protect
not only the mains but also the equipment itself against noise. These filters have no
function if the unit is not earthed properly.
WARNING!
High temperatures are achieved in this equipment.
Risk of fire and explosion are present in case safety measures are not taken.
Sign by means of warnings the hazardous areas at high temperatures.
Do not place the dry-block on inflammable surfaces or even on materials that
can be deformed due to high temperatures.
Do not obstruct any air-vent to avoid risk of fire in the equipment.
WARNING!
Never remove the insert from the dry-block or the thermo-elements from the
insert, while they are in temperatures far from the ambient. Wait until they reach the
ambient temperature so that the heterogeneous cooling of the parts does not jam
each other. If, by chance, a jamming situation happens, refer to item
8.2 - Instructions
for Insert
Jamming
to proceed properly.
presys
