Prestel HD-PTZ9IP, User Manual

Page: 43 / 61

43
1.
Make sure you have set presets. Otherwise, you cannot set this parameter. For details
about how to set a preset, see Setting Presets.
2.
When an alarm is reported, the PTZ camera automatically goes to the preset to capture
video in the correct scene.
d.
Upload to FTP
i.
With Upload to FTP selected, the camera will automatically upload snapshots to the specified
FTP server when an alarm is triggered.
1.
Make sure you have completed FTP and Configuring Capture before using this function.
e.
Trigger E-mail
i.
With Trigger E-mail selected, the camera will automatically send snapshots to the specified E-
mail address when an alarm is triggered.
1.
Make sure you have completed E-Mail and Configuring Capture before using this
function.
f.
Trigger Storage
i.
With Trigger Storage enabled, the camera automatically starts recording after an alarm is
triggered.
1.
Make sure you have completed the post-recording time settings before using this
function.
g.
Enable Plan
i.
Select the check box and set the start and end times during which motion detection alarm is
effective. You can directly drag the mouse to draw a plan and click
Edit to edit time periods in
the table. The time periods cannot overlap. The camera reports alarms during the specified
period(s) only.
ii.
You can select from Monday to Sunday and set four periods for each day.
iii.
Plan drawing using a mouse is only supported by IE versions later than 8.0. After setting the plan
for one day, you can apply the same settings to other days by clicking
Copy and Paste .
iv.
Drag the mouse to draw a plan and Edit time periods in the table.
7.
Click Save .
Configuring Audio Detection Alarm
The camera can detect input audio signals for exceptions. When the rise or fall of volume exceeds the set limit, or
when the input volume reaches the threshold, the camera reports an alarm and triggers the set actions. Make sure
that an audio input device is correctly connected to the camera and audio input is turned on in
Configuring Alarm
Input.