39
39
Owner’s Manual
Quick S
tar
t:
Lev
el
Setting
Ov
er
view
Hook
up
Connec
ting
to
a
Comput
er
Tut
orials
Technic
al
Inf
orma
tion
Trouble
-
shooting
and W
arr
an
ty
Sc
enes
, P
resets
, S
yst
em Menu
,
and MIDI C
on
trol
Sof
tw
ar
e: Univ
ersal C
on
trol
,
SL Remot
e, C
aptur
e,
and S
tudio O
ne A
rtist
Controls 4
Con
trols
39
Aux and FX Buses 4.4
4.4.2
Internal FX Send Controls
Mute Button
Mutes and Unmutes the Internal Effects Bus.
This button will mute or unmute its internal effects (EFX) bus. It will illuminate red
when the bus is muted.
Post Fader Send Button
Enables and Disables Post Fader Send.
By default, this button is enabled, and the send levels to the effects buses are
post-EQ, post-dynamics processing, and post-fader and therefore are affected by
fader settings. If the button is disabled, by default, the EFX sends use the Pre 2
setting, in which the sends are post-EQ and post-dynamics but pre-fader. However, in
the System Menu, you can switch the EFX sends to the Pre 1 setting, in which the
sends are pre-fader and pre-Fat Channel dynamics processing and EQ. Please review
Section 5.4 for details.
Output Level Control
Adjusts the Master Level of the Effects Send.
This knob controls the overall output level of the internal effects mix.
Internal Effects Send
Select Button
Enables Fat Channel Viewing.
As described in section 4.1.1, the Select button routes its Effects bus through the Fat
Channel, allowing you to add dynamics processing and EQ. From the Fat Channel,
you can also route each Effects bus to the Subgroups or Mains. By default, both FXA
and FXB are routed to the Main bus.
Mix Button
Enables Aux Bus Mixing and Metering in the Fat Channel.
When this button is enabled, the 24 encoders in the Fat Channel become the fx-send
level controls for each of their respective input channels. The meters will display the
send level of each of the input channels.