manualshive.com logo in svg

PRESONUS STUDIOLIVE 24.4.2, Owner'S Manual, Page: 103 / 200

Share
Download
PRESONUS STUDIOLIVE 24.4.2 Owner'S Manual Download Page 103

97

97

Owner’s Manual

Quick S

tar

t:

Lev

el

Setting

Ov

er

view

Hook

up

Con

trols

Connec

ting

to

 a

Comput

er

Tut

orials

Technic

al

Inf

orma

tion

Trouble

-

shooting

and W

arr

an

ty

Sc

enes

, P

resets

, S

yst

em Menu

,

and MIDI C

on

trol

 Software: Universal Control, SL Remote, Capture, and Studio One Artist 7

Sof

tw

ar

e: Univ

ersal C

on

trol

, 

SL Remot

e, C

aptur

e, 

and S

tudio O

ne A

rtist

 

Using StudioLive Remote for iPad  7.3

FX Mix Select and FX Bus Mixing

Displays Channel Send Levels to FX Bus

To create an FX Mix using SL Remote, tap anywhere in the FX Mix Select 

tab for that FX bus. The selected FX Mix tab will be highlighted to alert 
you that its individual channel-send levels will be displayed below. 

Press the Post button to engage post-fader sends.

Press the Mute button to mute the effect to its assigned buses.

The Gate, Compressor, and EQ Microviews function the 
same for auxes as they do for channels and mains.

To adjust the send levels for any channel, tap anywhere in its 
send level and move your finger up or down, while maintaining 
constant contact with the iPad screen. These send-level displays 
have been designed to emulate the StudioLive Fat Channel meters 
while in Aux Mix mode, so they should look very familiar!

POWER USER TIP: 

The Aux Sends support off-axis movement. Once you have 

touched a send-level control to select it, you can slide your finger anywhere in 

the screen and make an up/down movement to control the send level.

FX Edit Button

Opens FX Editor

From SL Remote, you can load new FX Types and adjust their parameters. 
To edit an effect, tap on the Edit button in the FX Select Tab for FXA or 
FXB. This will launch the FX Editor. 
 

Summary of Contents for STUDIOLIVE 24.4.2









































































































































































































Reviews:

No comments