35
4 Controls
4.2 Metering
StudioLive™ 32.4.2AI
Owner’s Manual
4.2
Metering
The StudioLive offers flexible metering at the touch of a button.
The meters in the Fat Channel section can monitor:
•
The post-gain, pre-dynamics/EQ, and pre-fader signal of each input
•
The post-gain, post-dynamics/EQ, and post-fader signal of each input
•
The amount of gain reduction being applied to each input
•
The output volume of each of the aux buses
•
The output volume of all of the internal effects buses
•
Finally, the meters can be used to recall the fader settings for a saved scene.
When functioning as a meter bridge, the Fat Channel
meters are scaled from -72 to 0 dBFS.
4.2.1
StudioLive Fat Channel Metering Controls
The Meters section of the StudioLive is located below the Master Control section. Each
of these buttons are toggle switches; turn them on and off by pressing them. The
meter state can also be changed by pressing another button in the Meters section, or
any Select button on the StudioLive, or a Mix or Mix/Pan button in the Aux section.
Your StudioLive mixer defaults to peak metering. Peak hold metering is also
available and can be enabled in the System menu.
See Section 5.5
for details.
Power User Tip:
It is important to mention that the meters simply overlay the
selected Fat Channel state. For instance, if you have Channel 16 selected and
then press the Output button in the Meters section, the knobs and buttons in
the Fat Channel section will still be active. The advantage of this is that you can
make adjustments in the Fat Channel while monitoring your entire mix.
Input Metering Button. Turns PFL Input Metering On and Off.
Switches the meters to display the pre-dynamics, pre-fader level of the input
bus. Meters are one to one (Meter 1 shows the level of Channel 1, etc.).
Output Metering Button. Turns Post-Fader Output Metering On/Off.
Switches the meters to display the post-dynamics, post-fader level of the Input
bus. Meters are one to one (Meter 1 shows the level of Channel 1, etc.).
Gain Reduction Metering Button. Turns Gain Reduction Metering On and Off.
Displays the gain reduction of the input bus. Meters have a one-to-one relationship
with channels (that is, Meter 1 shows the gain reduction of Channel 1 and so on).
Aux Metering Button. Turns Aux Bus Master Out Metering On and Off.
Displays the output level of each of the aux and effects buses.
Each odd-numbered meter displays the output level for the
aux bus directly above it (Meter 1 shows the output level for
Aux 1, Meter 3 displays the output level of Aux 2, etc.).
Fader Locate Button. Turns Fader-Recall Metering On/Off.
Displays the fader position of the stored scene.
Please review Section 5.3.5
.
