7
2
Getting Started
2.1
Level Setting Procedure
StudioLive™ 32.4.2AI
Owner’s Manual
11. Turn the trim knob on Channel 1 clockwise while watching
the first meter in the Fat Channel. Adjust the Channel 1 trim
knob until a little more than half of the green LEDs are lit. The
red LED at the top of the meter should never light up.
12. Press the Select button on Channel 1.
13. Raise the Channel 1 fader until it reaches “U” (unity gain).
14. Press the Main button in the Assign section of the Fat
Channel so that it illuminates. This routes the channel to the
main output bus.
