manualshive.com logo in svg

Premisys 600, Reference Manual

The Pioneer 600 is a versatile and user-friendly device designed to revolutionize your audio experience. With its cutting-edge features and advanced technology, this product guarantees exceptional performance. Enhance your understanding of its functions by conveniently downloading the free instruction manual from manualshive.com to maximize your enjoyment.

Share
Download
background image

Server Cards

7-9

IMUX Card

Inverse Multiplexer (IMUX) Card Settings

CURRENT PROFILE

The Current Profile indicates if a call profile is loaded into this HSU port’s dialing memory. 
The options for this parameter are none (indicating that the copy of a call profile template has 
not been downloaded to this port) or loaded (indicating that the copy of a call profile template 
has been downloaded to this port). 

Table 7-6. HSU Dial Screen of Actions

7.2.5

HSU Call Profile Screen

Once a call profile is copied from the Interface card templates, it can be used by the DTE on 
HSU ports for placing calls to other devices throughout the ISDN network. The HSU Call 
Profile screen is shown as Figure 7-5. Table 7-7 lists the settings and defaults for each 
parameter.

Once the appropriate information is inserted or changed on the fields of this screen, you can 
place a call by pressing the "D" (Dial) command from the Menu of Actions. When finished, 
the call can be disconnected by pressing the "H" (Hang-up) command from the Menu of 
Actions.

It is important to note that the HSU port used to dial the call must by in the standby state 
when the call is placed. The state changes from standby to active after the call has been 
placed. The system will not allow a call to be placed from an active port.

Note:

Any changes made to the loaded call profile will stay with the call profile copy until 
changed in a future session. Changes made to this copy will not change the call profile 
template on the Interface card.

Action

Function

Save

Saves changes to settings.

Undo

Returns all settings to the last saved state.

Refresh

Updates certain time-related information fields that are not automatically 
updated (i.e. performance and test data).

proFile

Brings up the call profile screen.

Load

This option loads a profile from the Interface card template. A call profile 
number must be inserted. Changes the Current Profile parameter from "none" 
to "loaded."

Main

Returns to the HSU card main screen. If changes are made to settings and not 
saved, you will be prompted to save or lose changes.

Summary of Contents for 600

















































































































































































































































Reviews:

No comments

Related manuals for 600

Patton electronics 2888 Getting Started Manual preview
2888
Brand: Patton electronics Pages: 51
ADTRAN 617600026F1 Quick Start Manual preview
617600026F1
Brand: ADTRAN Pages: 9
ForeScout CounterACT Quick Installation Manual preview
CounterACT
Brand: ForeScout Pages: 28
Paradyne Comsphere 3510 User Manual preview
Comsphere 3510
Brand: Paradyne Pages: 85
UfiSpace S9600-64X Hardware Installation Manual preview
S9600-64X
Brand: UfiSpace Pages: 35
Ozenda AR4505GW Instruction Manual preview
AR4505GW
Brand: Ozenda Pages: 116
ADTRAN NetVanta Analog Modem Dial Backup Interface Module Quick Start Manual preview
NetVanta Analog Modem Dial Backup Interface Module
Brand: ADTRAN Pages: 2
National Instruments PXI Terminal Block NI TB-2709 Installation Manual preview
PXI Terminal Block NI TB-2709
Brand: National Instruments Pages: 12
8e6 Technologies HL-002-006 Quick Start Manual preview
HL-002-006
Brand: 8e6 Technologies Pages: 94
Firetide HotPort 3103 User Manual preview
HotPort 3103
Brand: Firetide Pages: 32
Inter-m S- Media Manual preview
S- Media
Brand: Inter-m Pages: 20
ZyXEL Communications ONU5100-B22 User Manual preview
ONU5100-B22
Brand: ZyXEL Communications Pages: 2
ZyXEL Communications GS1900 Series User Manual preview
GS1900 Series
Brand: ZyXEL Communications Pages: 263
Altronix NetWay8GL Installation Manual preview
NetWay8GL
Brand: Altronix Pages: 8
Tripp Lite N201-100-GY-P Specification Sheet preview
N201-100-GY-P
Brand: Tripp Lite Pages: 2
ORANGE livebox Installation Manual preview
livebox
Brand: ORANGE Pages: 8
IBEX Westermo Ibex-RT-330-5G Series Manual preview
Westermo Ibex-RT-330-5G Series
Brand: IBEX Pages: 36
Tripp Lite N302-05M Specification Sheet preview
N302-05M
Brand: Tripp Lite Pages: 2

Brands by name

Popular brands

Load more brands