Precor UBK 800-SERIES UBK 800-SERIES Assembling And Maintaining Manual Download

Page: 4 / 100

Edition Information

ASSEMBLING AND MAINTAINING UBK 800-SERIES

UPRIGHT EXERCISE BIKES
P/N 300715-201 rev C
Copyright © February 2011 Precor Incorporated. All rights

reserved. Specifications subject to change without notice.

Trademark Note

Precor, AMT, and EFX are registered trademarks and Preva is

a trademark of Precor Incorporated. Other names in this

document may be the trademarks or registered trademarks of

their respective owners.

Intellectual Property Notice

All rights, title, and interests in and to the software of the

Preva Business Suite, the accompanying printed materials,

any copies of such software, and all data collected via the

Preva Business Suite, are exclusively owned by Precor or its

suppliers, as the case may be.
Precor is widely recognized for its innovative, award-winning

designs of exercise equipment. Precor aggressively seeks U.S.

and foreign patents for both the mechanical construction and

the visual aspects of its product design. Any party

contemplating the use of Precor product designs is hereby

forewarned that Precor considers the unauthorized

appropriation of its proprietary rights to be a very serious

matter. Precor will vigorously pursue all unauthorized

appropriation of its proprietary rights.
Precor Incorporated

20031 142nd Ave NE, P.O. Box 7202

Woodinville, WA 98072-4002

1-800-347-4404

http://www.precor.com

Summary of Contents for UBK 800-SERIES UBK 800-SERIES





































































































Search results

Summary of Contents for UBK 800-SERIES UBK 800-SERIES

Reviews:

Related manuals for UBK 800-SERIES UBK 800-SERIES

Brands by name

Popular brands

Precor UBK 800-SERIES UBK 800-SERIES, Assembling And Maintaining Manual

Search results

Summary of Contents for UBK 800-SERIES UBK 800-SERIES

Reviews:

Related manuals for UBK 800-SERIES UBK 800-SERIES

Brands by name

Popular brands