Precor UBK 800-SERIES UBK 800-SERIES Assembling And Maintaining Manual Download

Page: 11 / 100

Important Safety Instructions

Radio Frequency Interference (RFI)

This Precor exercise equipment conforms to the following

national standards defining acceptable limits for radio

frequency interference (RFI).

Federal Communications Commission, Part 15

This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a commercial

installation. The equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the owner’s manual instructions, may cause

harmful interference to radio communications.

WARNING

Per FCC rules, changes or modifications not
expressly approved by Precor could void the
user’s authority to operate the equipment.

Industry Canada

This Class A digital apparatus complies with Canadian

ICES-003.

Cet appareil numérique de la classe A est conforme à la norme

NMB-003 du Canada.

ATTENTION: Haute Tension
Débranchez avant de réparer

European Applications

CE compliance is claimed to the following directives:



2004/108/EC EMC Directive



2006/95/EC LVD Directive



2002/95/EC RoHS Directive

Directive compliance has been verified to the following

standards:



EN 55022



EN 55024



EN 60335-1



EN 60065 (P80 and PVS)

Summary of Contents for UBK 800-SERIES UBK 800-SERIES





































































































Search results

Summary of Contents for UBK 800-SERIES UBK 800-SERIES

Reviews:

Related manuals for UBK 800-SERIES UBK 800-SERIES

Brands by name

Popular brands

Precor UBK 800-SERIES UBK 800-SERIES, Assembling And Maintaining Manual

Search results

Summary of Contents for UBK 800-SERIES UBK 800-SERIES

Reviews:

Related manuals for UBK 800-SERIES UBK 800-SERIES

Brands by name

Popular brands