Precor UBK 800-SERIES UBK 800-SERIES Assembling And Maintaining Manual Download

Page: 36 / 100

Assembling and Maintaining UBK 800-Series Upright Exercise Bikes

Verifying That the Heart Rate Display Is
Operational

To verify that the heart rate display is operational:

Begin exercising on the equipment.

Grasp both touch-sensitive handlebars.

Note:

The heart rate is read within ten seconds. During

that time, the heart on the display flashes.

Look at the HEART RATE display. After a few seconds, a

number appears indicating your heart rate.

If a number does not appear in the HEART RATE display,

check the cable connection to make sure it is properly

connected.

Summary of Contents for UBK 800-SERIES UBK 800-SERIES





































































































Search results

Summary of Contents for UBK 800-SERIES UBK 800-SERIES

Reviews:

Related manuals for UBK 800-SERIES UBK 800-SERIES

Brands by name

Popular brands

Precor UBK 800-SERIES UBK 800-SERIES, Assembling And Maintaining Manual

Search results

Summary of Contents for UBK 800-SERIES UBK 800-SERIES

Reviews:

Related manuals for UBK 800-SERIES UBK 800-SERIES

Brands by name

Popular brands