Precor EFX 524I, Owner'S Manual

Page: 14 / 60

Product Owner’s Manual: Club Features 12
Viewing the Hour Meter
HOUR METER appears followed by the number of hours that
the unit has been in use. The EFX tracks the elapsed minutes,
but the value that appears is truncated to the nearest full hour.
4. Press either SELECT key, and HOURS appears briefly. When
the key is released, the numeric value reappears.
5. When you are ready, press ENTER to move to the next display
(software version).
Viewing the Software Version and Part Numbers
SW VERSION appears for two seconds followed by the upper
board application software part number and version (for example,
48181-350).
6. To see the upper boot and lower software version, use a
SELECT key. If needed, you can move through all three—upper
application, upper boot, and lower application—by pressing a
SELECT key.
7. Write the numbers below. You will need these numbers when you
call Customer Support with display-related questions. This
information will help rule out any software-related problems:
Upper Application P/N & VER: ___________________
Upper Boot P/N & VER: _____________
Lower Application P/N & VER: ___________________
8. When you are ready, press ENTER to move to the next display
(error log).
Viewing the Error Log
ERROR LOG appears on the display followed by the first entry
in the error log if there are any errors. Up to ten error codes can
be retrieved.
If there are no errors in the log, you will see three dashes (— — —)
displayed.
9. To view any additional error codes in the error log, use the arrow
keys. The following Table 1 describes key functionality within the
error log.
Table 1. Keys used in viewing error log entries
10. Copy the error code information to paper so you can provide it to
Customer Support if needed. Be sure to copy it exactly as
shown.
Key Description
▼
Displays the most recent error log entries
▲
Reveals earlier log entries
SELECT Toggles between the error log, the odometer reading
and the hour meter values at the time the error
occurred; a title (i.e., STRIDES or HOURS) appears
briefly followed by the actual numeric value associated
with the error log.