Model PD6000 Analog Input Process Meter Instruction Manual
84
Display Parameter
Action/Setting
Description
Force
Force
Force analog output value for loop break
Functn
Math Function
Select linear, square root, programmable
exponent, or round horizontal tank function
ICal
Internal
source cali-
bration
Enter internal source calibration (used for
scaling the meter without a signal source)
ignore
Ignore
Ignore loop break condition
Info
Information
Display software and S/N information
Inp 1
Input 1
Calibrate input 1 signal or program input 1
value
Inp 2
Input 2
Calibrate input 2 signal or program input 2
value (up to 32 points)
input
Input
Enter
Input
selection menu
LatCH
Latching
Set relay for latching operation
LED t
LED test
Test all LEDs
Length
Length
Enter the tank’s length in inches
Linear
Linear
Set meter for linear function and select
number of linearization points
Lit Hi
Max on little
display
Assign digital input to display max on the
small display
Lit HL
Max/min little
display
Assign digital input to toggle max/min on the
small display
Lit Lo
Min on little
display
Assign digital input to display min on the
small display
Little
Little display
Press Enter to assign the small display
parameter (default: engineering units)
LL I 1
Logic level
input 1
Assign logic level input 1 – 8, if expansion
modules are connected
LL O 1
Logic level
output 1
Assign logic level output 1 – 8, if expansion
modules are connected
locd
Locked
Enter password to unlock meter
Lt-CLr
Latching-
cleared
Set relay for latching operation with manual
reset only after alarm condition has cleared
mA
4-20 mA
Set meter for 4-20 mA input
